+
  • Stack-Screw-Dewatering-Machine.jpg
  • stacked screw type sludge pressure filter.png

Screw Sludge Dewatering Machine

Category

Sludge Treatment Equipment

零售价

市场价


Screw sludge dewatering machine belongs to the screw press, it's clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction.

重量

Quantity
-
+

库存

隐藏域元素占位

  • Overview
    • Commodity name: Screw Sludge Dewatering Machine

    Screw sludge dewatering machine belongs to the screw press, it's clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction.

    Whas is the screw sludge dewatering machine?

    Screw sludge dewatering machine belongs to the screw press, it's clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction. Screw sludge dewatering machine uses screw and the moving rings to clean itself as clog-free structure, and controlled by the PLC automatically, it's a new technology that can replace the traditional filter press like belt press and frame press, the screw speed is very low, so it cost low power and water consumption in contrast to the centrifuge, it is a cutting edge sludge dewatering machine.

    The stacked screw type sludge pressure filter belongs to the spiral press dewatering machine, which can reduce the sedimentation tank and sludge concentration tank, and save the construction cost of the sewage station. The stacked screw type sludge dewatering machine cleverly uses multiple ring automatic cleaning and filtration technology to replace traditional filter screen filtration. The self cleaning and filtration technology ensures the continuous and stable mud water separation effect of the dewatering machine. Through the strong squeezing force generated by changes in screw diameter and pitch, as well as the small gap between the moving ring and the fixed ring, the sludge is squeezed and dehydrated. It is a new type of solid bed separation equipment

    Wroking Principle

    The initial section of dewatering drum is the Thickening Zone, where the solid-liquid separating process takes place and where the filtrate will also be discharged. The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the End Plate further increases the pressure, so as to discharge dry sludge cake.

    Our Advantage

    Enclosed to minimize odors and noise
    ● Very low wash water usage(1/8 compared with belt press)
    ● Very low power consumption(1/20 compared with centrifuge)
    ● High cake solids
    ● Easy to operate and maintain
    ● Auto start-up, run and shutdown
    ● Touch screen operation optional
    ● Sludge Flow and Cake Monitoring System

    SPEC of the Screw Sludge Dewatering Machine

     

    Model

    Total Power(kw)

    Capacity (m³/h)

    DS Capacity(kg/h)

    HPODT101

    0.2

    0.15-2

    3-6

    HPODT102

    0.2

    0.25-4

    6-12

    HPODT103

    0.2

    0.35-6

    9-18

    HPODT201

    0.8

    0.4-7

    10-20

     

     

     

Keywords:

Messages